Installation Instructions

4. Installation Procedures
92
WiBAS OSDR-HUB and Sectoral 90 Integrated Antenna,
Continued
Procedure,
continued
Step
Action
6
Perform the following actions:
 Place the inclinometer.
 Easy rotate (left-right) the radio unit till the inclinometer digital
indicator reaches 0 degrees.
7
Use the wrench key (13 mm) to fully tighten the 3 nuts, as
shown below:
OFFSET RIGHT
OFFSET LEFT
Do not over tighten. Use the adjustable u-wrench to apply
the final tightening torque (follow the included antenna
instructions).
Continued on next page