Installation Instructions

WiBAS / WiBAS G5 Base Stations
Installation & Cabling Manual - Edition 3.2
153
WiBAS G5 micro-BS / evo-BS and Omnidirectional 360
Antenna with MTK-DMA-BX Mounting Kit, Continued
Procedure,
continued
Step
Action
2
Perform the following actions:
 Mount azimuth bracket onto the pole bracket (A) and then
install Set-A (x 2) and Set-B (x 2), as shown below.
 Mount elevation bracket onto the azimuth bracket (B) and
then install Set-A (x2) and Set-B (x2), as shown below.
 Use the tool with M8 hexagon female bit toslightly tighten the
screws.
The maximum tightening torque is applied to the last
step.
Continued on next page