Installation Instructions

WiBAS / WiBAS G5 Base Stations

Installation & Cabling Manual - Edition 3.2

Site Prerequisites, Continued

Tower or

Monopole

installation

If the construction is sensitive to sway angles and twisting then try to

install the antenna in a lower height platform (if it is available and

LOS is clear) in order to minimize the problem.



For

pole space requirements

and

applicable pole diameter

refer to

antenna installation leaflet.

 The antenna mounting kit should roughly point to the direction of the

opposite unit (based on the site survey data).

 Each radio and antenna unit must be installed according to the radio

planning data for pole installation (height, degrees e.t.c).

 The outdoor equipment, inclusive of the radio transceiver(s) and

antenna(s), should be mounted on a mast or on a tower.

 The pole construction should be rust free and strong enough to handle the

weight and restrict movement due to wind velocity (for wind velocity please

refer to antenna specifications datasheet).

 The pole longitudinal axis should be perpendicular to the earth’s surface

(horizontal plane) at the point of installation to allow correct alignment of

the antenna.

 An example on how the pole fixing should be implemented is shown below.