User Manual
Table Of Contents
- LIVE SYSTEM
- STARTUP MANUAL
- INTENTIONALLY BLANK
- TABLE OF CONTENTS
- CUSTOMER SUPPORT
- Bin-Sense LIVE CERTIFICATIONS
- MANUFACTURER’S WARRANTY
- SAFETY
- OVERVIEW
- SYSTEM SET UP
- CREATING ASSOCIATIONS
- MASTER UNIT FIRST CALL-IN
- 2. Once the Master unit diagnostic LED stops blinking, press and hold the scan button for six seconds. The LED should turn green and then after a few seconds turn pale blue and then go back to green.
- 3. The modem status LED will begin blinking. The modem status LED and diagnostic LED will both turn off once the call-in is complete.
- 4. Disconnect the power and restart the Master unit into normal mode to begin connecting to Remote units.
- INTENTIONALLY BLANK
- OPERATION
- MASTER UNIT OPERATION
- REMOTE UNIT OPERATION
- MASTER UNIT MODES
- Normal Mode
- Listener Mode
- FORCING A UNIT TO START IN NORMAL MODE
- 2. With the power off, press and hold the scan button.
- 3. Continue to hold the scan button and reconnect the Master unit battery. The diagnostic LED will light up solid green.
- 4. Wait five seconds, then release the scan button. The diagnostic LED will begin flashing rapid green.
- 5. Press and release the scan button. The Master unit will enter normal mode.
- 6. Reconnect the solar panels.
- MASTER UNIT SCANNING
- STARTING AND CONNECTING MASTER AND REMOTE UNITS
- OPERATION
- INTENTIONALLY BLANK
- STARTUP MANUAL
www.binsense.com March 2022 Version 1.0 Page 5
MANUFACTURER’S WARRANTY
INTRAGRAIN LIMITED ONE-YEAR WARRANTY
IntraGrain Technologies Inc. (IntraGrain) warrants that for a period of one (1) year from the date of original
purchase, this product will be free from defects in material and workmanship. IntraGrain, at its option, will repair
or replace this product or any component of the product found to be defective during this warranty period.
Replacement will be made with a new or re-manufactured product or component. No warranty is provided for
batteries.
WHAT THIS WARRANTY DOES NOT COVER
This warranty does not cover normal wear of parts or any damage resulting from any of the following: negligent
use or misuse of the product; damage in transport, natural disaster, improper installation or use, improper
abuse or improper handling. This warranty is limited to only those manufacturing defects that were caused or
allowed by IntraGrain.
HOW TO OBTAIN WARRANTY SERVICE
Please contact the local dealer you purchased the product from. For additional support, please contact
IntraGrain Technologies Inc. at 1.833.570.7979 or visit www.intragrain.com
CONTACT US
For support questions, troubleshooting, or help with your Bin-Sense device, please contact your local dealer for
more information and assistance, or IntraGrain Technologies Inc. at support@intragrain.com or
1.833.570.7979.