User's Manual
Table Of Contents
- MASTER UNIT
- INTENTIONALLY BLANK
- Table OF CONTENTS
- CUSTOMER SUPPORT
- Bin-Sense MASTER CERTIFICATIONS
- MANUFACTURER’S WARRANTY
- SAFETY
- OVERVIEW
- PACKAGE CONTENTS
- MASTER UNIT OVERVIEW
- INSIDE THE MASTER UNIT
- INSTALLATION
- INSTALLATION TIPS
- MASTER UNIT INSTALLATION
- 1. Place the Master unit on the top of the bin with the lid latches and link cables pointing towards the ground. Place the unit where it is easily accessible for future service and maintenance. The magnetic feet will hold the unit in place on the roo...
- 2. Place the external Remote antenna so that its signal will reach the most Remote units possible. Whenever possible, place the antenna so that it has clear line-of-sight to remote units
- 3. Mount the two solar panels side-by-side on the bin facing the direction of maximum sunlight (face south in the northern hemisphere, face north in the southern hemisphere).
- 4. Place the Master unit battery on the roof of the bin close enough to the master unit that the battery cable will reach the Master unit power cable.
- 5. Connect the Master unit sensor link cable to all the sensing cables and to any other Bin-Sense accessories (e.g. Fan Controllers). You’ll need to use a terminal box or splitter to connect more than one device to the sensor link cable.
- 6. Connect the Master unit power cable to the Master unit battery.
- 7. Connect the Master unit solar panel connections to both solar panels. Both solar panels connections are the same and can be connected to either solar panel.
- 8. Refer to the Bin-Sense Live Startup Manual for further instruction on how to get Bin-Sense Live system up and running.
- CONNECTING TO REMOTE UNITS
- INTENTIONALLY BLANK
www.binsense.com March 2022 Version 1.0 Page 5
MANUFACTURER’S WARRANTY
INTRAGRAIN LIMITED ONE-YEAR WARRANTY
IntraGrain Technologies Inc. (IntraGrain) warrants that for a period of one (1) year from the date of original
purchase, this product will be free from defects in material and workmanship. IntraGrain, at its option, will repair
or replace this product or any component of the product found to be defective during this warranty period.
Replacement will be made with a new or re-manufactured product or component. No warranty is provided for
batteries.
WHAT THIS WARRANTY DOES NOT COVER
This warranty does not cover normal wear of parts or any damage resulting from any of the following: negligent
use or misuse of the product; damage in transport, natural disaster, improper installation or use, improper
abuse or improper handling. This warranty is limited to only those manufacturing defects that were caused or
allowed by IntraGrain.
HOW TO OBTAIN WARRANTY SERVICE
Please contact the local dealer you purchased the product from. For additional support, please contact
IntraGrain Technologies Inc. at 1.833.570.7979 or visit www.intragrain.com
CONTACT US
For support questions, troubleshooting, or help with your Bin-Sense device, please contact your local dealer for
more information and assistance, or IntraGrain Technologies Inc. at support@intragrain.com or
1.833.570.7979.