User's Manual

V1.0 Installation, commissioning, maintenance and safety
7
IntraNav GmbH
Frankfurter Str. 27
65760 Eschborn
Phone [phone]
Fax [phone]
[e-mail]
Commerzbank Frankfurt
IBAN DE91 5004 0000 0571
9141 00
BIC COBADEFFXXX
Commercial register
Registral court
Frankfurt a. M. HRB 92924
 The devices must be installed in accordance with the currently
prevailing BG regulations "Electrical installations and equipment"
(BGV A3). The devices must be mounted in such a way that they can
be accessed at any time (opening the housing cover) to enable
maintenance work to be carried out later.
Connection of cables and wires
 When connecting the cables, always ensure that they are in perfect
condition and not damaged.
 Before putting the device into operation, check whether the cabling
has been carried out correctly and whether it is connected to the
network.
 Only the cabling described in the manual, enclosed with the device
or specified accordingly is to be used. IntraNav GmbH assumes no
liability for damage or impairment of functionality resulting from
the use of other cables.
Supply voltage
 When the supply voltage is connected to the mains plug, the status
LED flashes for a moment. The status LED is active when voltage is
applied.
 The device can be supplied with power via the Ethernet cable.
 Do not supply the device with voltage via the mains input and PoE
at the same time.
 Check that the nominal voltage of the power supply corresponds to
the values in the "Technical Data" section.