User's Manual

Installation, commissioning, maintenance and safety .0
12
IntraNav GmbHFrankfurter
Str. 2765760
Eschborn
Phone [phone]Fax
[phone]
[e-mail]_COPY17
Commerzbank
FrankfurtIBAN
DE91 5004 0000 0571
9141 00BIC
COBADEFFXXX
Commercial
registerRegistral court
Frankfurt a. M.
HRB 92924
CAUTION: The supply voltage of the device must not exceed the
following values: U <36V; I < 1.5A; P < 2W
Ethernet
▪ When installing and connecting the Ethernet connection, the
respective valid general conditions and their legal basis must be
observed.
▪ The Ethernet connection is connected to the Ethernet socket of the
device. The cable must be assembled into the RJ45 plug before
connecting it to the socket.
▪ Powering the device with PoE (Power over Ethernet) requires an
appropriate infrastructure such as PoE-Iniector or PoE-Switch.
Operating the device
▪ Due to its design, the device is not intended for use in EX zones.
▪ The intended operation of the system according to EN 60950-1 is
only guaranteed when the housing cover is mounted (cooling, fire
protection, radio interference suppression).
▪ In case of emergency (e.g. damaged housing, ingress of liquid or
foreign objects) immediately disconnect the power supply to the
device.
▪ The INTRANAV NODE detects mounting and position changes and
goes into fault as soon as a shock or an improper change of the
antenna is detected by the integrated accelerometer.