User's Guide Gigabit Ethernet Host Adapters ITIpci 5100G/GF

LSI Logic Corporation Page 32 of 56
Saving Driver Parameters
Beyond Reboot
Any parameter changes made using ndd will be lost the next time your
system is rebooted. To keep changes through reboot, parameter settings must
be placed in a start-up file with the following filename:
/etc/rc2.d/S99itialt
Example: If you need to adjust adapter 2 to turn Link Negotiation off and
increase the TCP/IP values, you could place the following lines in the
/etc/rc2.d/S99itialt start-up file:
#!/sbin/sh
# local kernel modification
#
case "$1" in
'start')
echo "Setting local kernel parameters...\c"
ndd -set /dev/alt instance 2
ndd -set /dev/alt link_negotiation 0
ndd -set /dev/tcp tcp_recv_hiwat 65535
ndd -set /dev/tcp tcp_xmit_hiwat 65535
ndd -set /dev/udp udp_xmit_hiwat 65535
ndd -set /dev/udp udp_recv_hiwat 65535
echo " "
;;
'stop')
echo "$0: No parameters changed."
;;
*)
echo "Usage: $0 {start|stop}"
;;
esac