User's Manual

8
Ear Tube and Tip
Replacing ear tube & tip
Your ear tube & tip will come connected. For optimal performance, replace ear tube & tip
every three months. Removing ear tube & tip from device: Grasp the “device end” of the ear tube;
gently turn ~90 degrees and pull to remove the ear tube from the device. Attaching ear tube & tip to
device: Gently push the “device end” of the ear tube onto the device until it snaps into position.
Cleaning ear tube & tip
Between replacements, you’ll need to clean the ear tube & tip with a cleaning wire, typically once a
week. Remove the ear tube & tip from device. Thread the cleaning wire through the ear tube, starting at
the “device end,” until it comes out at the “ear tip end,” then pull the cleaning wire all the way through.
Be sure to wipe off the wire before the next cleaning. Note: Ensure the wire goes through the ear tube
in only one direction, from “device end” to “ear tip end.” Do not reverse the wire back through the ear
tube. Clean the ear tip with a dry cloth