User's Manual

Removing ear hook from device:

Grasp the “device end” of the ear hook; gently turn ~90 degrees and pull to remove the ear hook from

the device.

Attaching ear hook to device:

Gently push the “device end” of the ear hook onto the device until it snaps into position.

Rocker switch functions

Rocker Switch Presses Function

Short up Volume up (default) or program up (configurable in MT)

Short down Volume down (default) or program down (configurable in MT)

Medium Up (default 3s, but configurable in MT) volume up or program up (default) (configurable in MT)

Medium Down (default 3s, but configurable in MT) volume down or program down (default) (configurable in MT)

Long Down with power on (default 5s, but will be configurable in

MT)

Shutdown

Long Down with power off (default 5s, but will be configurable in

MT)

Wakeup

Extra Long Down with power off (default 10s, but will be

configurable in MT)

Wakeup and enter pairing mode

a. Telephones

Using with telephones and cellular phones

i. Hold the phone handset as you normally would. Move the handset up slightly to

find the position that sounds best to you. If you encounter whistling (feedback),

tilt the phone handset at an angle until the whistling stops.

b. Cellular phones

i. Lumen 1000 is designed to comply with the most stringent Standards of

International Electromagnetic Compatibility. However, not all cell phones are

device compatible. Please check with your cellular phone carrier.

c. Telecoils - NA

Using Lumen 1000 with audio Accessory

2. Using Companion Mic

a. Typical use scenarios (sketch with stickfigures)

i. Cars, restuarants etc.

b. Describe CM with PICTURE showing labels identifying components