User's Manual

Safety Information Chapter 1
1- 10
 DO NOT charge the receiver while the receiver’s data cable and
sensor pads are still connected.
 Connect USB cable to receiver only after mounting it on charger.
 DO NOT install any other programs onto the workstation utilized for
review and diagnosis of patient image data (i.e computers with the
MiroView™ software).
 The capsule is disposable and should not be reused.
 The capsule and sensor pads are medical waste, and should be
disposed of according to local regulations or WEEE directive on waste
disposal.
 Only use the capsule, receiver, data cables and sensor pads in the
medical environment condition.
 All products connected with the MiroCam® Endoscope system must be
compliant with requirements of IEC60950-1 or UL certifications.