User's Manual

Chapter 3 Performing Capsule Endoscopy
3- 4
3.3 Examination Preparation
The following steps (3.3.1 to 3.3.4) explain the process to initialize the
receiver and register patient data for the capsule endoscopy procedure.
For more information see section 4.2.
3.3.1 Start System
 Turn on power of MiroCam® workstation.
 Click
icon to start the MiroView™ software program.
 Insert the ID and password and click
icon.
WARNING
Before starting the system, check the power rating for the
workstation.
3.3.2 Initialize the Receiver
 Connect the smaller connector of USB Cable to Receiver unit.
 Connect normal connector of USB cable to workstation.
 Turn on the power of the Receiver unit.
 Click
icon in MiroView™.
 Click
icon in the top right of MiroView™ screen.
 After end of formatting of MiroCam® Receiver unit, complete
patient information and click
button.