User's Manual

Chapter 4 Using MiroView™
4- 12
4.1.6 Basic Procedure
 In the patient list, select a desired patient and press the
button
to review data for the selected patient.
 Press the
button to play the images.
 Press the
button to stop playback of the images.
 Press the
button to save the current image in the Capture Box.
 Press the
button to create and print a report for the patient
being diagnosed.
 Press the
button to upload the data from the receiver or to
initialize the receiver.
4.2 Administering and Initializing Patients
Before performing capsule endoscopy, run MiroView™ to check in
(administer) and initialize the receiver for a patient.
4.2.1 Sequence of Operation
 Initialize the receiver unit
- Press the button.
- Connect the receiver’s USB cable to the receiver.