User's Manual

Chapter 8 EMC Information
Page 131
8.6 Guidance and manufacturer’s declaration -
electromagnetic immunity
The EUT is intended for use in the electromagnetic environment specified
below.
The customer or the user of the EUT should assure that it is used in such an
electromagnetic environment.
Immunity
test
IEC 60601
test level
Compliance
level
Electromagnetic environment - guidance
Conducted RF
IEC61000-4-6
Radiated RF
IEC61000-4-3
3 Vrms
150 kHz to
80MHz
3 V/m
80 MHz to
2.5GHz
3 Vrms
150 kHz to
80MHz
3 V/m
80MHz to
2.5GHz
The EUT must be used only in a shielded location with a
minimum RF shielding effectiveness and, for each cable
that enters the shielded location with a minimum RF
shielding effectiveness and, for each cable that enters
the shielded location
Field strengths outside the shielded location from fixed
RF transmitters, as determined by an electromagnetic
site survey, should be less than 3V/m.
a
Interference may occur in the vicinity of equipment
marked with the following symbol: