User's Manual

Safety Information Chapter 1
Page 16
1.4.3 Cleaning and Maintenance
n System and accessories
- All products should be cleanly maintained. For cleaning, rub lightly
with a soft cloth wet with warm water at least once a week. Do not
use organic solvents such as lacquer, thinner, ethylene and oxide
because they can damage the equipment. Be careful that foreign
substances do not enter the main system when cleaning.
- ALWAYS operate the equipment under sanitary environmental
conditions. DO NOT use heat or gas for disinfection of the capsule.
n Service Document
If required, or upon request, the local IntroMedic Distributor (authorized
IntroMedic Representative) may provide block diagrams, lists of spare
parts, descriptions, adjustment instructions or other related information
which may help qualified technical personnel in repairing specified
parts of the equipment which have been defined repairable by
IntroMedic Co., Ltd. .
n Moving the Equipment
- CAUTION when moving equipment.
- WARNING: Excessive impact/shock causes internal damage.
- If wiring is connected/disconnected when moving, check the wiring
status after moving.
- If damage to the equipment is discovered after moving, immediately
contact IntroMedic or local Distributor.