User's Manual
Chapter 1 Safety Information
1-13
DO NOT connect the USB cable to the MiroCam® Receiver while the
MiroCam® Receiver¶Vdata cable is still connected to sensor pads or
data belt.
DO NOT charge the MiroCam® Receiver while the MiroCam®
5HFHLYHU¶V GDWD FDEOH LV VWLOO FRQQHFWHG WR VHQVRU SDGV RU GDWDEHOW
while still attached to the human body.
Connect USB cable to the MiroCam® Receiver only after mounting it
on charger.
DO NOT install any other programs onto the workstation utilized for
review and diagnosis of patient image data (i.e computers with the
0LUR9LHZ Software).
The MiroCam® Capsule is disposable and should not be reused.
The sensor pads and data belt are medical waste, and should be
disposed of according to local regulations or WEEE directive on
waste disposal.
Only use the capsule, the MiroCam® Receiver, the data cables, the
sensor pads and the data belt in the medical environment condition.
All products connected with the MiroCam® Endoscope system must
be compliant with requirements of IEC60950-1 or UL certifications.
Check the outer surface of the endoscope for rough surfaces, sharp
edges, or protrusions which may cause a safety hazard.
3OHDVHGRQ¶WWU\WRFXWWKHODEHO