User's Manual

Chapter 3 Performing Capsule Endoscopy
3-23
3.8 MiroCam® Receiver Management ± Post Procedure
3.8.1 Cleaning
 Remove data cable (or data belt) from the MiroCam® Receiver .
 Capsule, data belt and sensor pads should not be reused.
 To clean the MiroCam® Receiver and the workstation, dampen a
soft cloth with warm water or with a commercial, nonabrasive
cleaner (or a mild soap or detergent solution) and wipe the
exterior surface lightly. DO NOT allow any liquids to come in
contact with the power connector, cable connector or switches.
DO NOT allow any liquids to penetrate connectors or openings in
the system cover. Cleaning of the system and accessories should
be conducted at least once a week.
CAUTION
DO NOT immerse the MiroCam® Capsule Endoscope
System or its accessories in liquid or clean with caustic or
abrasive cleaners. DO NOT spray or pour any liquid on the
system or its accessories. DO NOT use the organic
solvents such as a lacquer, thinner, ethylene and oxide
because they can damage the equipment. When cleaning
the data cable, do not use the cleaning tools such as brush
and sandpaper.