User's Manual Part 1

Introduction

da Vinci

Si™

1-4

DRAFT/PRE-RELEASE/CONFIDENTIAL

10/9/14

System Labels

Note: This user manual identifies labels as they appear on systems configured for

destinations in the USA. The languages supplied on labels may vary by the country or

countries for which a system is configured.

Note: The unit identification label includes the serial number, electrical ratings, and date

of manufacture. It may be necessary for the reader to be as close as 6 in (15 cm) from the

label to read this information.

Model IS3000 system components have individual system labels as shown below, all of which

repeat the same information except to specify the model (at upper right) and power

requirements (at lower right). Components with these labels include the Surgeon Console,

Model SS3000; Patient Cart, Model PS3000 Vision Cart, Model VS3000; Instrument Control Box,

Model ICB3000; Core, Model CR3000; and Camera Control Unit (CCU), Model DC3000. The

information supplied by these labels is repeated in this chapter

Figure 1.1 System labels: IEC 2

Edition

Space reserved for unit identifiers

(on all system labels)