User's Manual Part 1

OR Configuration

da Vinci

Si™

3-1

DRAFT/PRE-RELEASE/CONFIDENTIAL

10/9/14

3 OR Configuration

This chapter explains how to arrange da Vinci Si System components in the operating room for

maximum safety and ergonomic benefit. The following subjects are covered:

• 3.1 Surgeon Console Positioning, page 3-1

• 3.2 Patient Cart Positioning, page 3-2

• 3.3 Vision Cart Positioning, page 3-6

3.1 Surgeon Console Positioning

The Surgeon Console is placed outside of the sterile field. Use the handles on either side of the

Surgeon Console (Figure 3.3) for moving or positioning. Labels say “PUSH” near the handles

for pushing on both sides.

Figure 3.1 “PUSH” label near handles on sides of Surgeon Console

Never push or pull the console from the back or the front. A label near the top of the pillar on

the

ck illustrates the correct way to move it. Separate “no hands” labels on both lateral

supports discourage placing hands there to move it.

Figure 3.2 Labels on rear of Surgeon Console

Do not move Surgeon Console from the back

Move Surgeon Console using handles on side