User guide

11
1. Test the brake with the brake
handle. Observe how the brake
lever engages the wheel. If the
tension of the brake handle is
STILL too loose or too tight,
adjust using the following steps:
A. Ensure brake handle is not
locked.
B. TO LOOSEN: Brace the
jam nut while turning the
adjustment screw
CLOCKWISE.
C. TO TIGHTEN: Brace the
jam nut while turning the
adjustment screw
COUNTERCLOCKWISE.
D. Repeat with other brake.
CABLE ADJUSTER UNIT (FIGURE 5)
CARE AND MAINTENANCE
1. Ensure that ALL attaching hardware is secure at ALL times.
2. Check screw securing seat to rollator for tightness. Tighten if necessary.
3. Make sure snap buttons release and re-engage properly.
4. Replace any broken, damaged or worn items immediately.
CARE OF WHEELED ACCESSORIES
1. Clean wheels with warm water and mild cleanser. Dry with clean rag.
2. Lubricate with 3-in-1® oil periodically or if wheels begin to squeak.
FIGURE 5 - CABLE
ADJUSTER UNIT
Brake Lever
Jam Nut
Adjustment
Screw