Product Manual

ManualsBrandsInvacare ManualsBedroom & Patient RoomFixed Offset Trapeze Bar with Trapeze

Part No 1160803 1 Floor Base and Fixed Trapeze

For more information regarding Invacare products, parts, and services,

please visit www.invacare.com

Floor Base and Fixed Trapeze

Model Nos. 7714P and 7740P

NOTE:CheckALLpartsforshippingdamage.Incaseofshippingdamage,DONOT use.Contact

Dealer/Carrierforfurt herinstructions.

Safety Summary

ToensurethesafeandproperinstallationoftheFloorBaseandFixedTrapeze,these

instructionsMUSTbefollowed:

 WARNING

DO NOT use this product or any available optional equipment without first completely

reading and understanding these instructions and any additional instructional material

such as owner’s manuals, service manuals or instruction sheets supplied with this

product or optional equipment. If you are unable to understand the warnings, cautions

or instructions, contact a healthcare professional, dealer or technical personnel before

attempting to use this equipment - otherwise, injury or damage may occur.

The Fixed Trapeze MUST ONLY be installed onto beds with metal framed headboards.

The Fixed Trapeze used in conjunction with a bed, can assist an individual weighing up

to 250 lbs. (114 kg.). The Fixed Trapeze is designed to provide support, increase

stability and assist the user when repositioning himself/herself in bed.

Use the trapeze as an assistive device only. The trapeze is not designed to support the

total body weight of an individual or to be used as an assist device when transferring into

or out of a bed.

 INSTALLATION WARNINGS

After ANY adjustments, repair or service and BEFORE use, make sure that all

attaching component parts are secure.

DO NOT install or adjust the trapeze while the bed is occupied.

DO NOT attach a swivel trapeze to the floor base. This may cause the floor base to tip

over, causing injury to the patient and/or assistants.

The Floor Base MUST be positioned under the bed at the headboard position.

Ensure that the snap buttons fully protrude through the adjustment hole of the floor

leg assembly. This ensures that the Floor Base is properly installed and securely

locked in position.

 ACCESSORIES WARNING

Invacare products are specifically designed and manufactured for use in conjunction

with Invacare accessories. Accessories designed by other manufacturers have not

been tested by Invacare and are not recommended for use with Invacare products.

Assembly, Installation and Operating Instructions

SAVE THESE INSTRUCTIONS

Summary of content (8 pages)

PAGE 1
Floor Base and Fixed Trapeze Assembly, Installation and Operating Instructions Model Nos. 7714P and 7740P SAVE THESE INSTRUCTIONS NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact Dealer/Carrier for further instructions.
PAGE 2
Assembling the Floor Base NOTE: For this procedure, refer to FIGURE 1. 1. Install the ʺAʺ frame into the floor base assembly with the snap buttons facing the short length of the floor base. 2. Depress the snap button on one leg of the ʺAʺ frame and slide it into the floor base assembly until an audible “click” is heard. NOTE: Make sure that the snap button fully protrudes through the adjustment hole of the floor base assembly.
PAGE 3
Attaching Trapeze to Floor Base/Bed End WARNING DO NOT INSTALL OR ADJUST TRAPEZE OF AN OCCUPIED BED. Floor Base MUST be positioned under the bed at the headboard position. DO NOT attach swivel trapezes to the floor base. This may cause the floor base to tip over, causing injury to the patient and/or assistants. NOTE: For this procedure, refer to FIGURE 2 on page 4.
PAGE 4
Floor Base Installation Trapeze Key Upper Offset Bar DETAIL “A” Clamp Chain Links Insert Bar “S” Hook Upper Bed Bracket Lower Offset Bar Top Rail Grab Bar Bottom Rail Lower Bed Bracket Floor Base DETAIL “B” Tubular Hook (Facing Down) Bed End Installation INCORRECT MOUNTING (Note position of lower and upper bed brackets) Wing Nuts Upper and Lower Bed Brackets DETAIL “C” Socket CORRECT MOUNTING (Note position of lower and upper bed brackets) Upper Offset Bar Wing Nut Tubular Hook (Facing Do
PAGE 5
Installing/Adjusting the Grab Bar WARNING DO NOT INSTALL OR ADJUST TRAPEZE OF AN OCCUPIED BED. NOTE: For this procedure, refer to FIGURE 2 on page 4. Installing the Grab Bar onto the Offset Bar 1. Loosen the trapeze key by turning it counterclockwise. 2. Slide the clamp to desired position on the offset bar. 3. Secure the trapeze clamp to the offset bar by turning the key clockwise until it is secure.
PAGE 6
NOTES Floor Base and Fixed Trapeze 6 Part No 1160803
PAGE 7
LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975. This warranty is extended only to the original purchaser/user of our products. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state. Invacare warrants its product to be free from defects in materials and workmanship for a period of one year of the product for the original purchaser.
PAGE 8
Invacare Corporation www.invacare.com USA One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 Canada 570 Matheson Blvd E Unit 8 Mississauga Ontario L4Z 4G4 Canada 800-668-5324 All rights reserved. Trademarks are identified by the symbols ™ and ®. All trademarks are owned by or licensed to Invacare Corporation unless otherwise noted.