Product Manual

Part No 1160803 3 Floor Base and Fixed Trapeze
Attaching Trapeze to Floor Base/Bed End
 WARNING
DO NOT INSTALL OR ADJUST TRAPEZE OF AN OCCUPIED BED.
Floor Base MUST be positioned under the bed at the headboard position.
DO NOT attach swivel trapezes to the floor base. This may cause the floor base to
tip over, causing injury to the patient and/or assistants.
NOTE:Forthisprocedure,refertoFIGURE 2onpage4.
NOTE:Whenusingthefloorbaseinconjunctionwithabed,thelonglegsofthefloorbaseshould
slideunderthebedattheheadboardposition.
1. Puttheloweroffsetbarthroughtheclampontheupperbedbracket(Detail“B”)and
throughthesocketinthelowerbedbracket(Detail“C”).
2. Securelytightenthewingnutontheclampontheupperbedbrackettoholdthelower
offsetbarinplace(Detail“A”).
3. Puttheupperoffsetbarontotheinsertbarthatisweldedontotheloweroffsetbar
(Detail“A”).
4. Adjusttheheightand/orpositionofthetrapeze.RefertoInstallingtheGrabBaronto
theOffsetBaronpage 5.