Wheelchair User Manual
7 SEAT AND BACK
Invacare® Jymni™ Pediatric Series Wheelchair
44 Part No 1100868
7 Seat and Back
7.1 Replacing Seat Upholstery
1. Remove the mounting screws that secure the existing seat upholstery to the seat rails.
2. Remove the existing seat upholstery from the seat rails.
3. Install new seat upholstery by reversing STEPS 1-2.
FIGURE1 Replacing Seat Upholstery
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.
The procedures in this section apply to non-recliner models only. For recliner models, refer to Recliner on page 59.
10 and 12 inch seat depth has 8 mounting screws and 14 inch seat depths have 10 mounting screws.
Mounting Screw
Wheelchair Frame
Seat Upholstery
10 or 12-inch Seat Depth
Seat Rail