Adjustable ASBA Seat Service Manual

SECTION 6—FRONT RIGGINGS
Adjustable ASBA Seat 24 Part No 1143238
SECTION 6—FRONT RIGGINGS
 WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustments or service, ALWAYS turn the
wheelchair power off, otherwise injury or damage may result.
Installing/Removing Footrests
PH904A, PHAL4A, 70° and PW93
NOTE:Forthisprocedure,referto
FIGURE 6.1.
1. Turnthefootresttotheside(open
footplateisperpendicularto
wheelchair).
2. Installthehingeplatesonthefootrest
ontothehingepinsonthewheelchair
frame.
3. Pushthefootresttowardstheinsideof
thewheelchairuntilitlocksintoplace.
NOTE:Thefootplatewillbeontheinsideofthe
wheelchairwhenlockedinplace.
FIGURE 6.1 Installing/Removing Footrests -
PH904A, PHAL4A, 70° and PW93
4. RepeatSTEPS1‐3forotherfootrestassembly.
5. Toremovethefootrest,pushthefootrestreleaseleverinward,rotatefootrestoutward.
6. Adjustfootrestheightifdesired.RefertoAdjustingtheFootrestHeightonpage 25.
Footrest Release
Lever
Hinge Plate
Footrest
Hinge
Pins