Adjustable ASBA Seat Service Manual

SECTION 8—ARMS
Part No 1143238 43 Adjustable ASBA Seat
SECTION 8—ARMS
 WARNING
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Installing/Removing Flip Back Armrests
 WARNING
Make sure the flip back armrest release and height adjustment levers are in the
locked position before using the wheelchair.
NOTE:Forthisprocedure,refertoFIGURE 8.1.
NOTE:Flipbackarmrestreleaselevermustbeintheunlocked(up‐horizontal)positionwhen
placingthearmrestintothearmsockets.
Installing
1. Visuallyinspecttoensureflipback
armrestreleaseleverisintheunlocked
(up‐horizontal)position.
2. Slidetheflipbackarmrestintothearm
socketsontheseatframe.
3. Installthequick‐releasepinthrough
thereararmsocketandflipback
armrest.
4. Locktheflipbackarmrestbypressing
theflipbackarmrestreleaseleverinto
thedown(vertical)position.
5. RepeatSTEPS1‐4fortheoppositeflip
backarmrest.
Removing
1. Unlocktheflipbackarmrestby
positioningtheflipbackarmrest
releaseleverintotheup(horizontal)
position.
FIGURE 8.1 Installing/Removing Flip Back
Armrests
2. Removethequick‐releasepinthatsecurestheflipbackarmresttothereararmsocket.
3. PullUPontheflipbackarmrestandremovethearmrestfromthearmsockets.
4. RepeatSTEPS
1‐3fortheoppositeflipbackarmrest,ifnecessary.
Locked
(Down -
Vertical)
Unlocked
(Up -
Horizontal)
Flip Back
Armrest
Release
Lever
Flip Back Armrest
Rear
Arm
Socket
Quick-
Release Pin
Seat
Frame
Front Arm Socket