Adjustable ASBA Seat Service Manual

SECTION 10—JUNIOR BACKS
Adjustable ASBA Seat 60 Part No 1143238
Adjusting Spreader Bar Width
NOTE:Forthispr ocedur e,refertoFIGURE 10.5.
1. Removespreaderbar.RefertoRemoving/InstallingtheSpreaderBaronpage 59.
2. Removethetw omountingscrews,fourcov edspacersandtwolocknutssecuringthe
spreaderbarconnectorstothetube.
3. Slidethespreaderbarconnectorsinorouttothedesiredmountingposition(D etail“A ” ) .
4. Securethespreaderbarconnectorstothetube usingthetwomountingscrews,fourcoved
spacersandtwolocknuts.Torqueto75in ‐lbs ±20%.
5. Installthespreaderbar.Re fertoRemoving/InstallingtheSpreaderBaronpage 59.
FIGURE 10.5 Adjusting Spreader Bar Width
Tu b e
Spreader Bar Connector
Spreader Bar
Connector
Mounting
Screws
Coved
Spacers
Coved
Spacers
Locknuts
DETAIL “A” - SPREADER BAR
WIDTH POSITIONS
Spreader Bar
Connector
16 Inches
15 Inches
14 Inches
13 Inches
12 Inches
12 Inches
13 Inches
14 Inches
15 Inches
16 Inches