Product Manual

4 OPERATION
Part No 1171739 13 Invacare
®
APM
™
Model CG9900 Mattress
4 Operation
4.1 Mattress Replacement System
1. Remove the original mattress from the bed.
2. If necessary, lower the side rails to facilitate installation of the
mattress.
3. Unroll the powered mattress and place it on the bed frame.
4. Use the buckle straps to secure the powered mattress to the bed
deck in the following locations:
• Head End - Head End Bed Deck
• Foot End - Foot End Bed Deck
• Center - Center of the Bed Frame
FIGURE1 Mattress Replacement System - Mattress Replacement
System

CAUTION
DO NOT strap the mattress to the bed frame at the head and foot ends. Secure ALL mattress straps. Secure the straps
to the bed deck at the head and foot ends and to the frame at the center of the bed. Otherwise damage to the mattress
will occur when the head and foot ends are raised.

The powered mattress comes with eight nylon buckle straps.

Ensure that the hose is towards the foot end of the
bed.
Hose
Foot End
Head
End
Powered Mattress
Buckle
Straps