Product Manual
4 OPERATION
Invacare
®
APM
™
Model CG9900 Mattress 14 Part No 1171739
4.2 Installing the Side Rails
Installing the Power Unit
1. Swing out the bed hooks on the back of the control unit.
2. Place the control unit on the footboard.
FIGURE2 Installing the Power Unit
WARNING
Patient entrapment with bed side rails may cause injury or death. Mattress MUST fit bed frame and side rails snugly to
prevent patient entrapment. Follow the manufacturer’s instructions. Monitor patient frequently. Read and understand the
Owner’s/Operator’s Manual prior to using this equipment. Invacare product manuals are available at www.invacare.com or
your dealer.
Refer to the instructions provided with the side rails for the installation procedure.
If the bed does not have a footboard, place the
control unit on a flat surface, leaving room for the
hose to hang down.
Bed Hooks