True Low Air Loss System Owner's Operator and Maintenance Manual
Table Of Contents
- Special Notes
- Register Your Product
- Typical Product Parameters
- Label Location
- Section 1— General Guidelines
- Section 2— Operation
- Installing the Mattress Replacement System
- Installing the Side Rails
- Installing the Control Unit
- Connecting the Hose
- Connecting the Power Cord
- Using the Front Panel
- Powering Up the System
- Placing the Patient on the Mattress
- Transferring Patient From/To a Gurney
- Transferring Patient From/To a Wheelchair
- Preparing for CPR Procedure
- Section 3— Maintenance and Troubleshooting
- LIMITED WARRANTY
TYPICAL PRODUCT PARAMETERS
Part No 1148138 5 MA80 Series
TYPICAL PRODUCT PARAMETERS
Electrical Parameters
Performance Parameters
Mechanical Parameters
MA80/MA85
INPUT VOLTAGE AC: 90 V
INPUT FREQUENCY: 60 Hz
CURRENT: 2 A
MAXIMUM POWER CONSUMPTION: 150 ± 10 W
CIRCUIT PROTECTION: Dual fused,
250 V,
5 A fast blow fuses
MODE OF OPERATION: Continuous
MA80 MA85
WEIGHT CAPACITY
STANDARD MATTRESS:
BARIATRIC MATTRESS:
PRESSURE ZONE:
MAXIMUM FLOW:
MAXIMUM PRESSURE:
MAXIMUM FLOW TIMER:
SUPPORT SURFACE INFLATION TIME:
350 lbs
1000 lbs
5
1275 ± 100 LPM
35 ± 5 mmHg
15 minutes
25 - 60 seconds
PATIENT COMFORT CONTROL PRESSURES:
SOFT PRESSURE:
FIRM PRESSURE:
8 ± 4 mmHg
32 ± 4 mmHg
CYCLE TIME: 1, 3, 5, 10 minutes 5, 10, 15, 20 minutes
PATIENT CONTACT: Control unit and mattress have
Latex-Free components
MA80/MA85
CONTROL UNIT
DIMENSIONS (LXWXH):
WEIGHT:
POWER CORD:
CONNECTION:
PACKAGING:
15” x 6.5” x 11”
15 lbs
10 - 14 Feet Long, Hospital Grade
Triple Flow - Two ½” and One ¼” Single
Magnetic Quick Coupling
1 piece/box
AIR FILTER: Charcoal Air Filter with Fire Retardant