Power Wheelchair Owner's Operator and Maintenance Manual

SECTION 9—OPTIONS
Recumbent Handcycle Series 60 Part No 1114850
SECTION 9—OPTIONS
 WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Installing Rear Safety Light
 WARNING
Operation of the handcycle is subject to
all traffic rules and regulations. (This
may include the use of a safety light and
reflectors for dusk/night riding.)
NOTE:Forthisprocedure,referto
FIGURE 9.1.
Batteries
1. Removethelenscover.
2. InserttheAAAbatterieswithcorrect
polarity(+or‐).
3. Reinstalllenscover.
FIGURE 9.1 Installing Rear Safety Light
Mounting the Safety Light
1. Removethesetscrewfromtheclamponthesafetylight.
2. Positiontheclampontotherearseatpost.
3. Installthesetscrewintotheclampandtightensecurely.
Operating the Safety Light
1. PressGREYbuttontoturnsafetylighton/off.
2. Removelenscoverandslideswitchbackandforthforpulseorconstantmode.
Rear Seat Post
Set Screw
NOTE:Rearwheelsremovedforclarity.
Clamp
Lens
Cover
Safety Light