Power Wheelchair Owner's Operator and Maintenance Manual

SECTION 9—OPTIONS
Recumbent Handcycle Series 62 Part No 1114850
Installing the Draft Bumper
 WARNING
DO NOT use if draft bumper extends past rear wheels. If draft bumper extends past
the rear wheels, contact dealer.
NOTE:Forthisprocedure,refertoFIGURE 9.4.
NOTE:Thedraftbumpercannotbeinstalledifthetowbarisinstalled.
1. Removethefoursetscrewsoneach
mountingbracket.
2. Positionthemoun tingbracketsaround
thehandcyclerearframe.
NOTE:Makesurethatthedraftbumperis
centeredonthehandcyclerear
frame.
3. Usingfoursetscrewsforeach
mountingbracket,securethemounting
bracketstothehandcyclerearframe.
FIGURE 9.4 Installing the Draft Bumper
Installing the Safety Flag
NOTE:Forthisprocedure,refertoFIGURE 9.5.
1. Mountsafetyflaginholdersecuredtobacktubeonbikeframe.
FIGURE 9.5 Installing the Safety Flag
Using Safety Helmet
NOTE:Forthisprocedure,referto
FIGURE 9.6.
1. Securehelmetusingthechinstrap.
2. Ensureproperfit.
FIGURE 9.6 Using Safety Helmet
Draft Bumper
Mounting Brackets
Set
Screws
Handcycle
Rear Frame
Mounting Brackets
Safety Flag
Holder
Back Tube
Helmet