Power Wheelchair Owner's Operator and Maintenance Manual

SECTION 9—OPTIONS
Recumbent Handcycle Series 72 Part No 1114850
8. Usingtwomountingboltsandlocknuts,securetherearwheelbartothewheeltray.
9. Installthereceiverontothetrailerhitchofthevehicle,accordingtothevehicle
manufacturerʹsinstructions.
Using the Handcycle Rack
1. Positionthehandcycleontherackwiththefrontwheelinthewheeltraybracket.
2. Adjustthehandcycleracksothewheeltraybracketsitsagainstthefrontwheeland
therearwheelbarbracketssitagainsttherearwheels.RefertoAdjustingthe
HandcycleRackonpage 73.
3. Securethefrontwheeltothewheeltraybracketusingthestrapprovided.
4. Securetherearwheelstotherearwheelbarusingthestrapsprovided.
FIGURE 9.18 Assembling/Using/Adjusting the Handcycle Rack
Wheel Stop
Mounting
Positions
Wheel Tray Bracket
Mounting Bolt
and Locknut
Wheel Tray
Screws
Rear Wheel
Bar Bracket
Wheel Stop
Bracket
Receiver
Mounting Bolts
and Locknuts
Small Mounting
Bolts and Locknuts
Large Mounting
Bolts and Locknuts
Mounting Bolts
and Locknuts
Rear Wheel
Bar