Product Manual

SECTION 2—OPERATION AND ADJUSTMENT
ValueCare Bed Series 14 Part No 1134867
SECTION 2—OPERATION AND
ADJUSTMENT
Raising or Lowering the Entire Bed
NOTE: For this procedure, refer to FIGURE 2.1.
1. Pinch ears on the input drive shaft cover to open the cover.
2. Flip the input drive shaft cover up and push until it attaches to the gear box. The cross
pins will now be accessible.
3. Connect the manual crank to the cross pins until the spring engages the cross pins.
4. Unfold the handle on the hand crank.
5. Turn the hand crank to raise or lower the bed.
FIGURE 2.1 Raising or Lowering the Entire Bed
Ears
Gear
Box
Cross
Pins
Input Drive
Shaft Cover
Crank
Handle
Spring
Floor
NOTE: Head and foot sections do not have to
be raised to raise or lower bed.
Raise/Lower
Bed