Product Manual

SECTION 2—OPERATION AND ADJUSTMENT
Part No 1134867 15 ValueCare Bed Series
Using the Pendant
NOTE: For this procedure, refer to FIGURE 2.2.
NOTE: This bed uses a four function pendant for head and foot spring functions.
1. With the bed unoccupied, operate the bed through all phases of its operation as shown
in FIGURE 2.2.
2. If any problems arise during test, recheck all electrical connections and mechanical
hook-ups.
3. Repeat STEP 1. If the bed still does not function, contact a qualified technician or
Invacare Customer Service.
FIGURE 2.2 Using the Pendant
Depress this set of buttons
to raise the head portion
and foot portion
simultaneously.
Depress this set of buttons to
lower the head portion and foot
portion simultaneously.
Depress button "HEAD UP"
as shown on pendant control.
This will raise the head
portion of the bed only.
Depress button "HEAD DOWN" as
shown on pendant control. This will
lower the head portion of the bed only.
Depress button "FOOT UP" as shown
on pendant control. This will raise the
foot portion of the bed only.
Depress button "FOOT
DOWN " as shown on pendant
control. This will lower the foot
portion of the bed only.
Depress button "BED UP"
as shown on pendant
control. This will raise the
entire height of the bed.
Depress button "BED DOWN" as
shown on pendant control. This
will lower the entire height of the
bed.
Depress button "HEAD UP"
as shown on pendant control.
This will raise the head
portion of the bed only.
Depress button "HEAD DOWN" as
shown on pendant control. This will
lower the head portion of the bed only.
Depress button "FOOT UP" as shown
on pendant control. This will raise the
foot portion of the bed only.
Depress button "FOOT
DOWN " as shown on pendant
control. This will lower the foot
portion of the bed only.
Six Button Pendant
Standard Pendant