Product Manual

SECTION 4—PACKAGING, HANDLING, AND SET-UP
Part No 1134867 19 ValueCare Bed Series
SECTION 4—PACKAGING,
HANDLING, AND SET-UP
Receiving
1. Count cartons before signing shipping papers.
2. Designate someone at the facility to receive and inspect all merchandise. Use the
master order acknowledgment to check off items as they are received.
3. Compare the number of cartons shipped with the number of cartons actually received
and note such on the consignee copy of the freight bill. Make sure to have the truck
driver sign the copy acknowledging the count.
4. If shortage occurs, IMMEDIATELY contact Invacare Customer Service Department.
Unpacking
 WARNING
DO NOT plug the power cord into a power source until assembly is complete. To
do so could result in damage or personal injury.
DO NOT attempt to operate bed controls prior to completion of assembly
otherwise damage to bed components may occur.
NOTE: For this procedure, refer to FIGURE 4.1 on page 20.
1. Remove any loose packing from the cartons.
2. Carefully remove all components from the cartons:
• Foot Spring carton includes:
• One foot spring section, pendant, motor and cord.
• Head Spring carton includes:
• One head spring section.
• Bed End carton includes:
• Two bed ends.
• One drive shaft.
• Casters - two locking, two non locking.
• Hand crank.