Product Manual

SECTION 4—PACKAGING, HANDLING, AND SET-UP

ValueCare Bed Series 24 Part No 1134867

Installing the Motor

 WARNING

Ensure motor assembly is properly oriented before installing. The motor has one

end that operates the head section and one end that operates the foot section. If the

motor is installed in the wrong direction, then the pendant functions will operate

the reverse feature. This will possibly result in injury to the user.

NOTE: For this procedure, refer to FIGURE 4.4.

1. Align the motor assembly over the cams (Detail “A”).

NOTE: If necessary, use a rubber mallet to tap the motor into position.

2. Snap the motor assembly onto the cams (Detail “B”).

3. Place the bed frame flat with the springs facing up.

4. Install slide caps onto motor assembly (Detail “B”).

FIGURE 4.4 Installing the Motor

Head Spring Section

NOTE: Ensure proper orientation of motor assembly

so that pendant functions operate correctly.

Foot Spring Section

Motor Assembly

Slide Cap

Bed Frame

DETAIL “B”

Slide Cap

Cam (Foot End)

DETAIL “A”

Cam (Head End)

Bed Frame

Cam (Foot End)

Cam (Head End)