Product Manual

SECTION 1—GENERAL GUIDELINES
Part No 1134867 9 ValueCare Bed Series
Operating Information
DO NOT use near explosive gases.
Keep the product a minimum of 12 inches away from any direct heat source.
Close supervision is necessary when the this bed is used by or near children and
physically challenged individuals.
Possible fire hazard when used with oxygen administering equipment other than nasal or
masked type.
Check all parts for shipping damage and test before using. In case of damage, DO NOT
use. Contact a qualified technician for further instruction.
After any adjustments, repair or service and before use, make sure all attaching hardware
is tightened securely.
If bed is equipped with wheel locks, ALWAYS use wheel locks except when moving the
bed. Inspect for correct locking action on wheel locks before using bed.
DO NOT let any individual underneath the bed or in between the raised bed frame
components at anytime.
When bed is not to be used for an extended period, unplug electric bed from the wall
outlet.
The bed is not designed to be used as a patient transport. When transporting a patient,
use an approved patient transport. Otherwise, injury or damage may result.
After the bed has been assembled, always test to make sure that all sections of the bed are
properly and securely in place before using.
Make sure head and foot springs/sections are connected securely to the universal bed
ends before use.
If the unit is not working properly, call a qualified technician to examine the unit and
repair it.
The electric bed is equipped with locking casters. When transferring into or out of the
electric bed, always lock the locking caster(s). Inspect the wheel locks for correct locking
action before actual use. Even with casters properly locked, some flooring surfaces such
as tile or wood, will allow the bed to move under some conditions. Use on surfaces such
as these must be evaluated by the care provider.
Always remove manual crank(s) before performing electronic functions. Otherwise, the
crank(s) will turn when the motor is on and could cause personal injury or damage to the
bed.