User's Manual

User Guide
19
applying for a library card, the system will prompt the operator to put
in the designated amount of money. After putting in sufficient money
in the money entry/exit gate and making confirmation, the equipment
will handle card issues, and print a slip.
2) Book borrowing
When the operator puts a reader card close to the reader card
reading zone, the system will read the reader information and then
enter the selection interface. At the corresponding position of the touch
screen, by clicking on the book borrowing button, the system will
show the keypad and the shelf position number entry window. Perform
a light touch on the keypad to enter the shelf position number of the
book to be borrowed and make confirmation; perform a light touch on
the book borrowing button to enter the borrowing process, which will
need to the user to wait some time patiently, and then the system will
automatically rotate the book to the borrowing/return gate and will
automatically open for the user to take out the book and manually close
the gate; otherwise, the system will give an alarm and cancel this
operation. After the end of borrowing, a slip can be printed for
keeping.
3) Book return
When the operator selects a borrowing/return service in the main
interface, the system will verify the reader’s identity. At the
corresponding position of the touch screen, by clicking on the book
return button, the system will automatically allocate a spare shelf
position and rotate it to the borrowing/return gate, which will need to