User's Manual

Software User’s Manual
800 & 500 Series Reader Demo (.NET)
12
3 XCRF-800 Series Reader Demo User Manual
Click ‘Finish’.
The message of ‘New hardware is installed and ready for use’ displays. When
the installation of driver is completed, the computer can communicate with the
XCRF-800(500) Series reader via USB port. 2. Click ‘Connect’ button after the
desired communication mode is selected.
3. Conguring COM port parameters
The communication mode COM should be selected. Select the desired COM port
and baud rate as the screen appears below, and click ‘OK’ to connect the XCRF-
800(500) Series reader.
4. Conguring IP address
The communication mode TCP should be selected as the screen appears below.
Input the reader’s IP address, and congure the PC network area which should
be identical with that of the reader (defaulted as 192.168.0.210). The default port
number is 7086. And click ‘OK’ to connect the XCRF-500 Series reader. When