User's Manual
Software User’s Manual
800 & 500 Series Reader Demo (.NET)
14
3 XCRF-800 Series Reader Demo User Manual
3.3 Read and write operation
1. Conguration before read and write operation
The screen appears:
Figure: for XCRF-807 Reader
Figure: for other readers
Read mode: ‘Loop read’ and ‘Single read’
a) “single” mode: read only once, acquired tags will appear in the tag list.
b) “loop” mode to read: continuously read tag operation will be performed until
the stop read button is pressed. The acquired tags will show in the tag list.
The estimated numbers of tags to read: ll the estimated number of tags to write
or read.
Antenna number: select the number of antenna that is connected.
(The XCRF-807 reader can use non-adjacent antennas. For example, as shown
in the gure below, optional antenna No. 1 and 4 can be select to operate
simultaneously, while the No. 2 and 3 antennas are not in operation. Other
readers are able to use one antenna or multiple adjacent antennas.)
“
”: Conguring antenna power. The screen appears.