User's Manual
Software User’s Manual
800 & 500 Series Reader Demo (.NET)
18
3 XCRF-800 Series Reader Demo User Manual
Start address: in byte, start address is the start location for reading user data. (even
number).
Data length: the data length is calculated from the start address, the byte number
of the data to read (even number)
Tag user area data: read data results.
OK: conrm to read user area data.
Close: close the read user data area screen.
Tip: EPC code defaults to 12 bytes. The length of EPC data area of tags from
different vendors or of different models may vary, of which the maximum is 30
bytes.
Tip: “Start address” + “data length” should not exceed the maximum number of
bytes of user data.
9. Write user data
Select the data is the list, click ’ ’ button, and the screen appears:
Select tag (TID): Select the data is the list, and the TID number will
automatically be added to the text box. (If the operation is to read EPC, it will be
the EPC number.)
Start address: in byte, the start address is the start point (even number) of the
user data area to write.
Data length: the length will be calculated according to the input characters. The
byte number of the data to write should be even.
Write data: input the hexadecimal digit (A byte consists of two characters) or
ASCII string in the text box. The number of characters input should not be odd,
and should correspond with the byte number congured.
Write: Conrm to write the user area data.
Close: close the write user data area screen.