User's Manual
Software User’s Manual
800 & 500 Series Reader Demo (.NET)
19
3 XCRF-800 Series Reader Demo User Manual
Tip: “Start address” + “data length” should not exceed the maximum size of
bytes of user data.
10. General writes tag
Select the data is the list, click ’ ’ button, and the screen appears:
Select tag: Select the data is the list, and the TID number will automatically
be added to the text box. (If the operation is to read EPC, it will be the EPC
number.)
Bank: select the operation bank.
PWD: access password.
Start address in byte, the start address is the start point (even number) of the user
data area to write.
Data length: the length will be calculated according to the input characters. The
byte number of data to write should be even.
Write data: input the hexadecimal digit (A byte consists of two characters) or
ASCII string in the text box. The number of characters input should not be odd,
and should correspond with the byte number congured.
Write: Conrm to write the user area data.
Close: close the write user data area screen.