User's Manual
Software User’s Manual
800 & 500 Series Reader Demo (.NET)
25
3 XCRF-800 Series Reader Demo User Manual
4. Setting Read tag by I/O input trigger (applies to XCRF-807 reader)
TID LG (doule bytes): Enter TID length of the tag to operate.
User data Addr (double bytes): in byte, starting address for the user data area to
read (even number).
UD LG (double bytes): enter the length of user memory (even number).
Trigger port: select the trigger port.
Trigger type: Never, falling edge, rising edge.
Antenna: select the number of antenna to operate.
Q: set the Q value when a read operation is performed.
The conditions to terminate read operation:
Level: the level of the input ports used to determine whether to stop a read
operation.
Read time: read operation trigger, by a certain time interval delay, stop a read
operation.
Cong: save the conguration changes to the reader.
Close: close the window.