User's Manual
Software User’s Manual
800 & 500 Series Reader Demo (.NET)
31
4 XCRF-500 Series Reader Demo User Manual
(TID)’ text box. TIDs can be set by user.
Select tag (TID): input the tag TID.
Data Section: select ‘All Memory’ , ‘TID", ‘EPC’ , ‘user’ , ‘access password , or
‘kill password’ .
Lock Flag: select ‘lock’ or ‘unlock’.
Access FWD: input tag access password. The default is: ‘00000000’.
OK: conrm conguration.
Close: close the screen.
3. Block Permanent Lock
Lock Area: select the block to lock.
Address of start block (BlockPtr) : 16 blocks comprise of a unit. 0x00 indicates
that operation starts from block 0, and 0x01 indicates block 16.
Block permanent lock range (BlockRange): range of block permanent locks,
from the starting block address (BlockPtr) to (16 * BlockRange-1), the minimum
is 1.
Mask (Mask): each one corresponds to a block for permanent lock operation.
1 performing a permanent lock, 0 maintaining the original lock state. BlockPtr
Mask corresponds to the highest position, (16 * BlockRange- 1) corresponds to
the lowest level.