User's Manual

XCRF-860 USER’S MANUAL
7
The serial port is used for a short-distance connection (less
than 5m), and the RS-232 serial connector shall be connected to
PC via a piece of 1.5 m dedicated cable that comes with
standard delivery.
Fig.3.1 XCRF-860's connections to RS-232 port via the dedicated
cable
The network port is used for a long-distance high-speed
connection (up to 100m).The network port can be connected to
the switch or the concentrator via the network cable, or directly
connected to the network port of PC.
3.2.3 External AC Power
Connect XCRF-860 reader to the external AC power supply.
The steps include:
1. Assure that the AC power’s voltage and operating
frequency are of AC100V - 240V/50Hz;
2. Assure that XCRF-860 reader’s switch is “Off” ;
3. Connect one end a power cable with the AC power’s
socket, and then connect the other end with XCRF-860 reader’s
3-core AC power input port;
4. Turn on the power switch on XCRF-860 reader’s front
panel; the power supply indicator lamp will be on after the reader