User's Manual

XCRF-860 USER’S MANUAL
16
Port 12, 13 and 14 are only available for Enhanced
Edition of the XCRF-860.
16－Lamp of L1。
5.4 – IO control interface
1 – 5v power supply, (maximum current 200mA)
2 – Input port 1;
3 – Input port 2;
4－ Gnd Grounding；
5 – Output port 1;
6 – Output port 2;
7 – Output port 3;
8 – Output port 4;
Note: Low electrical level: the input and output voltage of IO
control interface respectively are 0V； high electrical level: +3.3V
There are four antenna ports available on the Back
Panel of XCRF-860, each of which can be connected to an
antenna or a load of 50 Ω
(optional). Four pieces of RF
cable for RP-SMA to RP-N type connectors are included
in the standard delivery.
The antenna port of the XCRF-860
reader may be susceptible to damage if power on the reader