User's Manual

User’s Manual to XCRF-502E Reader
Internal use.only. Any transmission is not
allowed without permission.
3
1.4 Working Conditions
The primary condition for XCRF-502E Reader’s normal
operation is a complete RFID data collecting system (consisting of the
Reader, electronic tag, PC and Reader interface software).
Please make sure whether all the components constituting a RFID
data collecting system are complete, before using XCRF-502E Reader.
Confirm the connections among the components are reliable.
The specific requirements of XCRF-502E Reader on its working
environment are as follows:
Þ Temperature range;
-10℃ to +60℃ (14℉ to +140℉)
Þ Humidity range:
20%~95%
Þ Power voltage:
AC: 100V to 240V/50 to 60Hz
1.5 Safety and Protective Measures
The power range for this product is AC 100V to 240V/50 to
60Hz. Please check the power range carefully before installation and
operation!
The installation and commissioning personnel must stay at least
30cm away from the Reader while it is working (radiating microwave