User's Manual

User’s Manual to XCRF-502E Reader
Internal use.only. Any transmission is not
allowed without permission.
11
14
Output port 3
grounding
15 Output port 4
16
Output port 4
grounding
Relay output 4
3 – Network port uses RJ-45 connector, for data transmission to
upstream PCs or equipments; the data rate of the network port is
10/100Mbps;
4 -Antenna port 1;
5 - Antenna port 2.
Each antenna port must be connected to an antenna before the
Reader is power on. A load of 50Ω must be connected to the ports
without antennas, otherwise the Reader will be damaged once power
on.
4.2.3 Upper Panel