User's Manual

User’s Manual to XCRF-502E Reader

Internal use.only. Any transmission is not

allowed without permission.

The main display interface of demo software will display the

current IP of the Reader after successfully clicking the “Connect”; after

“successfully connected”, click “Function”>“Query the Reader’s

parameters” and the current IP of the Reader will be searched.

5.3.3 IP Address Setting

Search IP to check whether the Reader’s IP address has been set,

before IP address setting.

1. Select “TCP” in the communication mode, if the Reader’s IP

address has been set.As illustrated in Fig. 5.3;

Fig. 5.3 IP Address Setting

2. Follow the procedure below to set the Reader’s IP address, if

it hasn’t been set:

1） Connect the Communication Port

Connect the serial port of the Reader and the serial port of the

host via a communication cable. Select “Communication port” as the

port mode, as illustrated in Fig. 5.4:

Fig. 5.4 Selection of Serial Port for the Communication Mode