User's Manual

User’s Manual to XCRF-502E Reader
Internal use.only. Any transmission is not
allowed without permission.
24
connection will be successful if the domain name of the host must be
identical to the IP address.
5.4 Installation step
5.4.1 Fixing XCRF-502E Reader
There are following fixing methods, depending on the
different installation locations:
1. Desktop Installation
In this way, XCRF-502E Reader will be horizontally put
on a desktop.
2. Wall Mounted Installation
Fix XCRF-502E Reader on a vertical surface with its 4
installation ports on the projections of its bottom plate. The fixing
method: insert expansion bolts into a vertical surface (a wall or side
face of a rainproof box) or fix the Reader with bolts and nuts.
5.4.2 Connections to Other Devices
Connect the Reader to antennas and PC.
1. Connection to External Antennas
The 2 N-type ports for coaxial cable are provided on the Back
Panel of XCRF-502E Reader, in order to connect the Reader to
external antennas.Low-loss RF cable is used as the connection cable.
Tightened connections are required among cable, antenna and the
Reader.